Center-back seal. Maximum display area. Cost-effective.

Back seal pouches (also called center seal pouches) feature the seal on the back center of the pouch — not on the sides. This means the entire front face is uninterrupted by seals, giving you maximum printable area for branding and product information.
Back seal pouches are filled on premade-pouch filling machines (not VFFS). They are a cost-effective alternative to stand-up pouches when shelf display is important but a bottom gusset is not required.
| Back Seal Pouch | 3-Side Seal Pouch | |
|---|---|---|
| Seal location | Back center | Three sides (top, bottom, one side) |
| Front display | Uninterrupted | Uninterrupted |
| Cost | Slightly higher than 3-side | Lowest |
| Best for | Granules, powders, liquids | Small portions, sachets |
| Material Structures | BOPP/CPP, BOPP/VMCPP, BOPP/PE, PET/AL/PE, PET/MPET/CPP, PET/MPET/PE, PET/PE, PET/CPP, PA/PE, PET/PA/PE, PET/AL/PA/PE |
|---|---|
| Size Range | Width 80–500mm, Height 100–800mm |
| Thickness | 50–250 micron |
| Printing | Gravure printing, up to 10 colors |
| Accessories | Tear notch, hang hole |
| MOQ | 10,000 pcs |
| Production Lead Time | 15–30 days |
A back seal (fin seal) pouch is sealed along a single back seam, forming a cylinder that is then sealed top and bottom. It is built for high-speed VFFS filling of powders and granules.
Powders, granules, snacks, and free-flowing solids filled on vertical form-fill-seal lines.
Yes. With one seal seam and simple tooling, back seal pouches are among the lowest-cost flexible formats at volume.